 |
 |
 |
|
V-Hammer Squat Stand II
Description:
The V-Hammer Squat Stand II bridges the gap between a full power rack and a traditional squat stand. All the features of the Vulcan Hammer Squat Stand, with an adjustable pullup bar. The V-Hammer Series are perfect for the professional training environment of elite athletic training facilities, collegiate and high school athletic gyms, or CrossFit® Affiliates and garage gyms.
Specifications:
- Constructed of heavy duty 2.5" x 2.5", 8-Gauge Steel (4.28 mm) , much thicker than 11-Gauge (3.175mm)
- Perfect for squats, bench press, shrugs, etc.
- Black Powder-Coated Finish
- 1" Holes with 2" spacing
- Heavy Duty one inch Black Oxide coated bolts, and laser engraved gussets give the Vulcan Hammer II a a sleek and modern look as well as a very secure base
- V-Hammer II Stands can be bolted the floor for added stability when doing heavy band work. Basic Kipping pull-ups can be performed on this stand without bolting to the floor
- Professional Grade 3/8" J-Hooks with 1.5" thick UHMW
- Weight Plate pegs are included and provide storage for weight. Easily attach and detach by hand with safety pins
- Safety Spotters Included (approximately 25" in Length), coated with 1.5" thick UHMW
- Capacity: Unlimited
- 93.5" x 48" x 50"
- Weighs 258 lbs
- Lifetime Warranty
- Bolt together design allows the Vulcan Hammer II Squat Stand to ship flat
- You will need two one inch crescent wrenches or combination crescent wrench and socket with 1" socket. Use of a level is recommended when assembling uprights. Always assemble first then tighten/adjust evenly.
|
|
|
 |
|
 |
| Accessories For This Product |
|
|
|
|
