Color Bumper Plates Sets
Color Bumper Plates from Vulcan Strength utilize the highest quality rubber compounds, clean vibrant colors, and our proprietary steel insert anchoring system. You will immediately notice how our steel inserts are moulded into the plate and eliminate all metal to metal contact between plates to provide a tight fit, unsurpassed durability and less noise than standard bumper plates with pressed in stamped metal inserts.
|
|
Color Bumper Plates Specifications
Our Training Colored Bumper Plates provide a lower cost alternative to
our Elite Competition Color Bumper Plates and are offered in pound increments. Our Color bumper plates mimic
the true colors of Olympic competition plates as mandated by the
International Weightlifting Federation - IWF: Red 55 lbs (similar to Red
25kg), Blue 45 lbs (similar to Blue 20kg), Yellow 35 lbs (similar to
Yellow 15kg), Green 25lbs (similar to Green 10kg) and lastly Light Grey
10 lbs (similar to White 5kg training bumper).
Colored Bumper Plates greatly improve the
aesthetics of your gym or training center and give a more professional
look consistent with major university and professional athletic team
gyms. An added benefit of the Proper Colored weight designation is that
it allows your athletes or trainees to identify their training weights
quickly by designated colors. Oftentimes, those who are uninitiated to
Weightlifting confuse the black 10 lb and 15 lb bumper plates as well
as 25 lb and 35 lb. These color bumper plates are made of high quality
rubber and have very bright color. It is normal for Minor color
variations to be present in small areas. Any plates that don't meet our
appearance standard do not ship. Plates are as they appear in photos.
You won't find a higher quality bumper for a better price.
Specifications:
- Made to IWF (International Weightlifting Federation) Standard diameter 450 mm (17.7165 inch).
- Solid
Rubber Bumper Plates made from virgin rubber not recycled rubber.
Low bounce for safety
Safe for platform use
Vulcan Bumper Plates have been tested to 30,000 drops from a height
of 9 feet without any deformation of the insert or damage to the rubber
surface.
- Shore Durometer A 88.7 - 89.1 What is Shore Durometer? See Here.
- Plate
diameter: 450 mm (17.7") - Collar opening: 50.4 mm
Insert type: Forged Steel, not a thin pressed or stamped
steel like some others Inserts are actually anchored into the rubber,
unlike most which are simply pressed in
- Plates have a thinner, low-profile design which allows you to fit more on the bar
- Weight tolerance: +/- 1%
- Bumper Plate Thickness:
- 10 lb: 1-1/16"
- 15 lb: 1-3/16"
- 25 lb: 1-3/4"
- 35 lb: 2-5/16"
- 45 lb: 3-1/8"
- 55 lb: 3-1/8"
- For: CrossFit®, Weightlifting, strength training, commercial gym or home gym use
Warranty: 36 months on 55 lb, 45 lb, 35 lb, 25 lb Bumper Plates; 12 months on 10 lb and 15 lb bumper plates
Note: All bumper plate sets, bumper plates & Olympic Bar Packages and other heavy items may ship LTL freight. If you live in an area that is not accessible to a full sized freight truck contact us to make other shipping arrangements to avoid delays. You will be responsible for unloading the items from the truck, not the driver. If you require inside delivery or a truck with a lift gate to deliver, you must contact us for an additional rate quote for these extra services. *Free shipping to the North East, Mid West, and South East regions of the Continental US. For North West and South West regions of the Continental US,a surcharge applies Contact Us if you need a quote for shipping outside the Continental US
|
|
|
